For use on wood, premium, durable stain, goes on smooth to leave a flawless finish that will hold up under the toughest conditions. Fast, even coverage, UV fade protection & water repellent. Dries to touch in 15 minutes, dries to handle in 24-48 hours.
For small outdoor projects. Penetrates wood surfaces with a fade resistant formula and protects against water damage. Coating resists UV damage. Covers approximately 25 sq. ft. per can.
Use on marine surfaces, wooden furniture and doors made of wood, metal and fiberglass and hard to reach areas. Resist scuff marks, alcohol and household chemicals. Flexible coating resists weather extremes. Dries in 2 hours on bare wood. Contains ultraviolet radiation absorbers and anti-oxidants. Formulated for exposure to sunlight. Cleans up with paint thinner or mineral spirits.
Gives protection for wood surfaces. Marine-quality finish. U.V. and weather resistant. For use on bare, stained or previously varnished interior and exterior wood surfaces including doors and trim, window sills, outdoor furniture, fencing, railing and wooden boats. On smooth wood, approximately 10-30 sq. ft. per 11.5 oz.
Can be used on wood, fiberglass, coated metal or painted surfaces. Contains Ultra Violet Absorbers for advanced sun protection. Use on exterior surfaces such as fences, railings, lawn furniture, doors, boats and marine surfaces. Can be used on interior windowsills and door frames for added Ultra Violet protection.
Formulated to expand and contract with weather conditions. Scratch, abrasion and impact resistance. Fast drying and self leveling. UV protection from the sun.
Formulated with a blend of resin and oil to provide a natural finish for bare wood. Provides wood penetrating protection again the sun and damaging weather elements. Water-repellent, keeping moisture out and guard against mildew, warping and checking. Use on new or reconditioned wood only, including decks, siding, roofs, shingles, shakes, trim and on log homes. Can be applied to all natural wood species such as cedar, fir, pine, cypress, spruce, redwood, plywood and pressure-treated wood. Dries to a flat, translucent-toned finish. On smooth surfaces, covers 400-500 sq. ft. per gallon; On rough surfaces covers 150-250 sq. ft. per gallon.
Deep-penetrating, linseed oil-based stain. Beautifies and protect. Allows the grain, texture and color variations within the wood to show through. Water repellent. Use on siding, shingles, shakes, log homes and roofs. Dries to a natural, flat finish. On smooth surfaces, covers 400-600 sq. ft. per gallon; On rough surfaces, cover 150-250 sq. ft. per gallon.
For use on all wood decking, outdoor furniture and fencing, porches, steps, railings wood patios as well as cement and walkways. Long-lasting, water-repellent and fade resistant. Will resist scuffing, and oil and grease will wash off with mild detergent and water. For use on most types of lumber including redwood, cedar, cypress, pine, fir and pre-treated wood. Dries to a uniform, durable, low-lustre finish. Covers 400-500 sq. ft. per gallon. Rates vary upon the porosity and type of surface.
For use on decks, fencing, wood patios, wood screening, porches, swimming pool walks, outdoor furniture, steps and railings. Water-repellent. For use on most types of lumber such as cedar, fir, pine, cypress, spruce, redwood and pressure-treated wood. Dries to a natural, flat finish. Covers 400-600 sq. ft. per gallons.
For siding, shingles and trim. Heavily pigmented and thick. Can be used in colder temperatures. Covers previously painted or stained surfaces. Does not require the use of a primer coat on non-extractive-prone wood. Fade-resistant and water-repellent. Apply on new or reconditioned wood siding and shingles, cement siding, manufactured hardboards, previously painted surfaces, aluminum and pre-primed ferrous metal, masonry, stucco and plywood panel siding. Dries to a natural, flat finish. Covers approximately 200-400 sq. ft. per gallon. Coverage depends upon the porosity of surface.
Gives protection for wood surfaces. Marine-quality finish. U.V. and weather resistant. For use on bare, stained or previously varnished interior and exterior wood surfaces including doors and trim, window sills, outdoor furniture, fencing, railing and wooden boats. One gallon covers up to 300-400 sq. ft. depending upon surface porosity.