Made with mineral spirits. Thins oil-based paint, stain, and varnish. Helps eliminate brush marks. Improves leveling and increases penetration of the coating. Cleans brushes and degreases tools.
Use on all paints, varnish, lacquer and polyurethanes. Contains micro-abrasives for complete deglossing. Quickly cleans and degreases without washing. No unpleasant odors.
Enriches the performance of latex/acrylic paint and keeps projects flowing smoothly. Gives latex paint the feel of oil paint, without the clean-up hassles. Reduces tip clogging and piston freeze-up with cup gun spraying. Makes latex paint spray like oil paint with approximately 20 percent less pressure.
100-percent pure mineral spirits. Thins oil-based paint and varnish. Cleans brushes and equipment after use. A superior cleaner and degreaser for wood and metal surfaces.
Made with 100-percent pure linseed oil. Dries faster than raw linseed oil. Improves the flow and gloss of oil-based paint. A classic finish for natural wood to seal and protect it.
Lead-free blend of ingredients improves the drying ability of oil-based paint, enamel and varnish. Speeds drying time between coats of finish, even in damp or cool weather.
Contains a special water rinsing detergent that speeds up final cleaning after soaking. Removes oil paint, varnish, lacquer, shellac or enamel from hard or wet brushes. Can be reused when stored in a tightly closed jar or can and clear liquid poured off.
Enhances penetration and adhesion of oil-based paints and primers. Use to make interior painting projects flow more smoothly. Use with oil or alkyd paints. Reduces brush marks and leveling problems with the paint. Reduces fatigue and frustration with painting projects.
For Hammerite metal paints. Clean all equipment and brushes after use.
Will accelerate dry time and improve the film properties of most conventional oleoresins, alkyd, or polyurethane coatings. Accelerates dry time by up to 40 percent. Increases hardness by up to 30 percent. Raises gloss by up to 10 percent. Improves resistance to chemicals and solvents. VOC compliant in most states.
Enhances gloss & hardness. Reduces dry time. Use with tractor and implement enamels or oil-based enamels.
Formulated to thin latex and water based paints, enamels and clear finishes to enhances the flow and leveling. Cleans latex paint from paint brushes, leaving bristles soft and supple. Can be used for cleaning wet paint from rollers, spray guns, buckets and paint trays. 100-percent solvent free.
Made of 100-percent pure gum spirits. Thinner and brush cleaner for oil-based paint, varnish and stain. Preferred by artists for oils and art grade paints.
Made with 100-percent pure. Thins synthetic enamels, anti-rust coatings, rubber cement and mastics, when a slower rate of evaporation is desired.
Cleans natural and synthetic bristle brushes, artist brushes, roller covers, trays, and equipment after a project. Removes hardened latex and oil-based paint, enamel, varnish, shellac, lacquer, and polyurethane to leave tools looking like new.
A higher level of natural and renewable resources. Clean burning fuel.
A clean-burning fuel for marine stoves.
Strong, fast-acting. Thins fiberglass and polyester resins, vinyl and adhesives. Also use as a clean up solvent after completing fiberglass projects. 100-percent pure.
High-solvency thinner for lacquer, polyurethane and epoxies. Cleans brushes, tools and equipment after use. Medium drying formula.
Made with 100-percent pure varnish makers and painters naphtha. Thins rubber cement, adhesives and oil-based paints. Fast drying.
Made with 100 percent renewable resources and is derived from tree resin. Use for oil-based paint varnish, enamel, stain and artist grade paint.
Substitute, lacquer thinner is made with a higher level of renewable resources and is biodegradable. Thins lacquer and epoxy, cleans tools and equipment after lacquer projects. 99 percent lower hazardous air pollants.