Blend of portland cement and graded sand for pouring overlays less than 2" thick, patching and topping chipped concrete surfaces or laying flagstone and paving bricks.
Formulated to make structural repairs to any concrete, masonry or stucco surface that is 1/8" to 2" deep. Low sag formula for vertical and overhead repairs. 20-30 minute working time and unique properties allow sculpting of the material during placement. Exceeds ASTM C 928 R-2.
A polymer-modified graded sand for filling between interlocking pavers, brick, patio blocks and concrete slabs. Once swept into pavers joints and dampened with water it hardens, locking pavers into place. Designed to resist weed growth and insects, erosion, non-staining, use for installation of pavers or replacing existing joints. Coverage area 50-55 square feet tumbled pavers. 85-90 square feet regular pavers. Tan.
For general concrete work, setting posts, or building sidewalks, steps, patios, downspout troughs, floors, and curbs. Activated with water. 4,000 psi average compressive strength.
Blend of masonry cement and graded sand to make a long lasting, strong bonding mortar for laying brick, block, or stone for walls, columns, etc.; and for repairing damaged non-structural joints in brick, block, or stone masonry. Activated with water. Max order quantity pallet of 40. Sales of this item are limited to Dealers with fork lifts capable of unloading at time of delivery.
For setting fence posts, mail boxes, signs and more. Sets a 4 x 4 post. No water required. Mixes in 30 seconds. Expands to set posts. Same technology used to set utility poles. Helps to protect the post against rotting. Can be used during winter.
A washed properly graded sand used for underlayment for brick pavers, mixed to make concrete, traction for snow and ice, can be mixed with potting soil. Meets ATM C 33 specifications.
Use for children's sand boxes, molding and building. Specially grades washed sand that has been dried and screened. Fills approximately 1/2 cubic feet.
Multi-use product for a variety of decorative and landscaping applications, gardening, patios, tree wells, walks, rooftops, fish ponds, and aquariums. Maybe used as an extension to stucco wallcoating. Mix with Portland Cement SKU#332.9414 and All-Purpose Sand to make concrete.
A blend of portland cement, sand, gravel, and special reinforcing fibers to reduce shrinkage cracks and improve impact resistance. Just add water. Use for walkways, patios, steps, garage\shed floors.
Blend of fast-setting cements, sand and gravel. Designed to set hard in approximately 20-40 minutes. Sets posts without mixing. For setting fence posts, mailbox posts, lamp posts and swing sets. For building steps, sidewalks and air conditioner pads.
Mixed with aggregate and other ingredients to make concrete mix, mortar mix, and base coat stucco. Complies with current ASTM C 150 and Federal Specifications for portland cement. Available in Type I, Type I/II and Type III. To make Concrete: 3 parts All Purpose- Gravel SKU# 007.6455, 2 parts All Purpose Sand SKU# 906.6382, 1 part Portland Cement.