For paneling, drywall and other light construction, inside or outside. Helps reduce nail pops and mechanical fasteners. Use to bond drywall to concrete or block walls, drywall to drywall laminations or paneling and FRP. May be applied at temperatures from 10-degrees to 100-degrees fahrenheit. Moisture resistant. Meets and exceeds ASTM C-557 specifications. With a 3/8" bead 10.2 oz cartridge covers approximately 14 lin. ft. and a 28 oz. cartridge covers approximately 38 lin. ft.
Fills gaps to bridge irregularities and voids in projects. Used for subflooring, paneling, plywood, bathroom fixtures, insulation, furring strips, electric outlet boxes, chip and wall board, marble sills, moldings, trims, signs, name plates, brick, stone, etc. Designed for a wide range of construction and remolding applications. Excellent aging characteristics. Easy to apply. Remains flexible. Good impact characteristics. Waterproof, general purpose mastic. Exceeds HUD-FHA and APA requirements under specifications AFG-01 and FHA bulletin UM-60 and ASTM C 557. Covers approximately 275-325 sq. ft of plywood floor installations per gallon of adhesive.
Make a tough, permanent bond on contact. Instantly bonds metal, wood, ceramic, leather, rubber and many other surfaces. Bonds similar and dissimilar materials as soon as the two surfaces are joined. 700 psi bond strength. Dries amber, sets in 5 minutes.
For all common building materials including trim, paneling, drywall, foamboard, tub surrounds, plastics, metal, masonry and wet, frozen and treated lumber. Safer to use. No harmful fumes. Non-flammable. Water clean up. 10 to 120-degrees fahrenheit service temperature. Covers 129 ft. with 1/8" bead per 10.5 oz and 355 ft. per 29 oz. cartridge. Exceeds the requirements of the APA's AFG-01 specification and ASTM C557.
Perfect for installing and repairing mosaic, plastic and ceramic tile, and linoleum. Water clean-up.
Used for the installation of rubber and vinyl cove base. Bonds to concrete, concrete block, gypsum drywall, plaster, wood, plywood, brick and plastic laminate, and abraded glazed or metal. Aggressive Initial Grab. No open time required. Plasticizer Migration-Resistant. Easy cleanup. Excellent trowelability. AGIS Guarantee. Covers 27 lin. ft. per 11 oz. cartridge and 90 lin. ft. per 30 oz. with 1/8" bead.
Eliminates the need for nails and screws in DIY and repair jobs. Premium quality. High strength. Gap-filling. Low odor. Soap and water clean up.
For more demanding construction and repair projects. For bonding most common materials including wood, metal, brick, marble, ceramic tile, concrete, drywall and wet, frozen and treated lumber. Fills gaps between materials, reduces the amount of nailing and can be extruded down to 0-degrees F. Meets most State and Federal VOC regulatory requirements. Covers approximately 13-123 ft per 10 oz cartridge. Coverage depends on the diameter of the bead.
Formulated for mounting mirrors. Can be used on all types of structurally sound surfaces, such as wood, drywall, metal and painted surfaces. Remains flexible, and will not be become brittle over time. Provides a safe, strong and permanent bond to most types of mirrors.
A premium construction adhesive offering a strong, instant hold. Maintains flexibility even in low temperatures. GREENGUARD Gold Certified.
Designed for subfloor installations and plywood use. Reduces the amount of nailing and helps eliminate squeaky floors. Fills gaps and irregularities between materials. Not designed for continuous submersion. 100-percent solvent-free and contains no ozone-depleting chemicals. Nonflammable formula with no offensive odor offers freeze/thaw stability and cleans up with water before setting. 10 to 120-degrees fahrenheit service temperature. Covers 355 ft. with 1/8" bead. 89 ft. with 1/4" bead and 39 ft. with 3/8"bead. Passes the requirements of APS's AFG-01 specifications and ASTM C557.
Used for glued floor projects and deck constructions. Works well for general needs such as paneling, wood or pre-decorated foam panels, trim molding, and various wall tiles. Helps reduce squeaks and sound transmission. Fast set, fast cure, high bond strength, water and weather resistant, and easy cleanup. Meets AFG-01, ASTM D 3498, GREENGUARD certified, LEED requirements.
For small projects and repairs. Premium quality, high strength, gap-filling. Minimizes nailing requirements. Water-based. Low odor. Bonds to wood, plywood, drywall, stainless steel, glass, or cork. Covers 9.2 ft. to 20.7 ft. per tube. Coverage depends on the size of the bead.
Design for a wide range of construction applications including wet, frozen and treated lumber. Also for metal, brick, concrete, ceramics and most large panel-type substrates. Fills gaps and irregularities between materials and provides a more solid backup surface. Reduces the amount of nailing and helps eliminate squeaky floors. Meets ASTM D3498 and ASTM C557 specifications.
Drywall & Panel Construction adhesive is best suited for bonding drywall to wood. Works well on foamboard, decorative panels, furring strips, concrete walls or drywall. Non-flammable, environmentally friendly, ultra low VOC, fast set, fast cure. GREENGUARD approved. Meets LEED requirements. Not recommended for use on mirrors or underwater applications.
Forms instant, high strength bonds on a variety of surfaces. Use in the home, office or workshop. Form strong bonds on contact to eliminate the need for clamps, temporary fasteners and long set times. For bonding plastic laminate for counters and tabletops, rubber, wood and plastic veneers, cork, metal, wood, leather and other porous and nonporous materials. Neoprene rubber. Resists the effects of heat, water, weather, grease, oil and household chemicals. Spreads easily, dries tack free quickly and offers a 2 hour open time.
For the repair and installation of concrete, clay, slate or composite type roof tiles on existing roofs. Bonds to most building materials producing a water and weather resistant seal against the elements. Withstands high temperature roof exposure while maintaining its high tensile and shear strength. Easy to use with all "S" type tile and flat type tile applications. Do not use on tar/asphalt impregnated materials. 20 min. at 70 degrees Fahrenheit, 50-percent RH open time, 24 hours cure time, -20 to 180 degrees Fahrenheit service temperature. Mineral spirits or paint thinner, clean up. 1/4" bead covers approx. 32 lin. ft. and a 3/8" bead covers approx. 14 lin. ft.
A weather-resistant adhesive specially formulated to adhere to non-porous surfaces such as glass, ceramic, glass and vinyl.
Eliminates the need for nails and screws in DIY and repair jobs. Ideal for bonding of wood decking to joists, fencing and siding. Premium quality. High strength. Gap-filling. Low odor. Weather resistant. Paintable. Soap and water clean up. Dries white.
Ideal for small projects on all surfaces. Holds in 30 seconds, and bonds virtually anything including tub & tile, mirrors, flag brackets, wood, floating shelves, laminate repairs, brick and stone, water feature and more. Paintable. All weather. Gap-filling, durable, 100-percent waterproof formula.
Provides adhesion strength and versatility. Use to adhere metals, glass, rubber and plastics. Universal vehicle maintenance and repair solution. Can be used as a potting material in electrical and computer applications. Paintable. Waterproof. Flexible. Non-flammable.
For the installing porcelain, quarry, stone, ceramic and mosaic tile over interior walls, floors, and countertops. Helps prevent tiles from slipping after placement. Can also be used to install tiles up to 12" x 12". Excellent grab. Covers 50 sq. ft. per gallon with a 5/32" v-notch trowel.
Use to install vinyl composition tile (VCT) and asphalt tile. Bonds to concrete, wood and wood underlayments, existing well-bonded resilient flooring, terrazzo, marble and radiant-heated subfloors where the surface temperature does not exceed 85 degrees fahrenheit (29-degrees Celsius). 24-Hour working time. Dries clear. Can be used over "Cutback" adhesive residue. Moisture and alkali-resistant. Excellent trowelability. AGIS Guarantee. Covers 350-400 sq. ft. per gallon applied to 1/8" tile.
High strength adhesive for professional builders and DIYers. Use to bond formica, plastics, metal, foam rubber, leather, tile, and fabrics. For installing indoor/outdoor carpeting on porches, patios and etc. Exceeds CPSC safety standards. Fast drying, 20-30 minutes. Open time, up to 5 hours. Covers up to 200 sq. ft. per gallon. Not affected by oil or gasoline.
Installation of either rubber or vinyl cove base. Bonds rubber and vinyl cove base to concrete, gypsum drywall, plaster, wood, plywood, brick, plastic laminate, and abraded glazed or metal surfaces on all grade levels as recommend by the cove base manufacturer. Covers 90 lin. ft. per 30 oz. with 1/8" bead.
Use for the installation of outdoor carpeting. Bonds to concrete, asphalt paving and other clean, sound paving surfaces (not asphalt roofing), exterior or marine grade plywood decking which is sound and not subject to deterioration (not plank decking or treated wood), aluminum boat decks which are clean and roughened, fiberglass which has been roughened, substrates which have been painted, stained, or otherwise coated must be tested to assure compatibility with the adhesive. Water-resistant. Strong initial grab. No open time required. Long working time. Excellent bond integrity and trowelability. Temperatures should be 65-degrees Fahrenheit (18-degrees Celsius) or above in areas where adhesive is to be used. Covers approximately 90 to 108 sq. ft. per gallon using a 1/8" x 1/16" x 1/8" trowel.
Used for the installation of rubber and vinyl cove base. Bonds to concrete, concrete block, gypsum drywall, plaster, wood, plywood, brick and plastic laminate, and abraded glazed or metal. Aggressive initial grab. No open time required. Plasticizer migration-resistant. Easy cleanup. Excellent trowelability. AGIS Guarantee. Application on 2 -2-1/2" rubber or vinyl cove base covers 310-340 lin. ft. per gallon. Application on 4" rubber or vinyl cove base covers 220-240 lin. ft. per gallon. Application on 6" rubber or vinyl cove base covers 165-180 lin. ft. per gallon.