Mainly used for windshield wiper tubes but used for a variety of applications where low pressure is present. Bulk self-dispensing 50' spool.
Made of black PVC blended compounds for use with petroleum products with reinforced polyester braiding and a cover that is oil, grease and ozone resistant. 175 PSI at 70 degrees F. Operating temperature range: -40F (-40C) to 175 degrees F (79 degrees C).
Fuel line/vapor emission hose is manufactured to meet the specifications for multiple types of gasoline, including those enhanced with alcohol up to 15 percent. The tube and cover are resistant to oil, ozone, and gasoline. The inner reinforcement is a spiral synthetic cord. Rated at 40 PSI.
Bulk self-dispensing box.
Manufactured to meet the specifications of heat and ozone resistance for under the hood temperatures. High strength reinforcing resists coiling, system surge pressures, and kinking. 40 PSI.
Mixture of seven organic ingredients designed to permanently seal holes and cracks in radiators, water jackets, and cylinder heads. Just pour into the radiator while the engine is running, it seeks out holes, and swells shut as soon as it comes in contact with air. Will not re-dissolve, and draining or flushing will not affect the seal. On a card.
Seals even large leaks without interfering with the flow through the radiator and heater core tubes.
Intended for cars with heavier build ups of rust, radiator and heater core deposits.
Circulates through the cooling system., Seals leaks, stops head gasket and combustion chamber seepage, prevents rust and lime from forming. In a plastic bottle.
Proprietary cleaning agents removes rust deposits and oily residue in one easy step, helps Anti-Freeze/Coolant efficiently flow to all parts of the cooling system. In a plastic jug.
Sprayable sealer that forms a rubber barrier to stop leaks. Wicking action seals hard-to-reach leaks without the need for disassembling or removing parts. Designed for low pressure leaks in hoses, oil pans, differentials, transmission pans, fluid reservoirs and plastic, PVC and metal pipes.
Safe and tasteless for fresh water and plumbing systems of boats, RVs, homes, and trailers. Protects from bursting to -50 degrees Fahrenheit. Ethanol Blend. Not recommended in marine engines, marine toilets or as heat transfer fluid. Safe for copper, brass and plastic (except acetate). Use full strength, no mixing required.
Designed for conveying most modern fuels in cars, trucks, buses, etc. Withstands oil, grease, abrasion, and ozone. Exceeds the burst requirements of the SAE specification.
Protects RV's potable water system from freeze damage. Also for trailers, boats, mobile homes, cottages, and swimming pools, all fresh water systems. Provides burst protection to -50 degrees Fahrenheit. Inhibits fouling and corrosion while preventing algae growth. Helps in lubricating pumps and valves throughout the system.
Used with all electric pumps with 3/4" outlets. For dispensing diesel fuel, gasoline, grease, kerosene and petroleum oils. Nitrile inner tube, external is a blend of Nitrile and PVC materials for protection against cuts, abrasions and snags, and for puncture resistance. 8" internal spring guard protects the hose from exceeding its bend radius, to last longer. Braided copper static ground wire. Threaded fittings. Made in the USA.
Marked every foot with a notch mark and UPC code.
Used with pumps with 1" outlets. For dispensing diesel fuel, gasoline, grease, kerosene and petroleum oils. Threaded fittings. Made in the USA.
Blend of premium long-lasting inhibitors to guard against temperature extremes, rust and corrosion. Pre-mixed 50/50 with demineralized water. Compatible with antifreeze/coolants used in vehicles with aluminum and other engine metals. Freeze up protection to -34 degrees F, boil over to +265 degrees F. Meets or exceeds the specifications in ASTM D3306 and D4985.
Shell Zone 50/50 pre-diluted antifreeze coolant. Bitter formula to prevent swallowing.